Miami is the most technically demanding glazing market in the United States. NOA documentation, TAS-tested systems, and HVHZ-compliant submittals — ACG brings the full package to every Miami-Dade project.
Miami is the commercial glazing contractor's most technically demanding market in the United States. Every project in Miami-Dade County falls within the High Velocity Hurricane Zone (HVHZ) — a designation that triggers requirements far beyond standard Florida Building Code. In HVHZ, glazing subs who deliver FL approval numbers without corresponding Miami-Dade NOA documentation cannot pass plan review. GCs who have been burned by this know exactly what we're talking about.
The construction pipeline in Miami is enormous. Brickell's financial district continues its vertical expansion — tower after tower of high-performance curtainwall and window wall systems. The Design District mixed-use buildout requires high-specification storefront and specialty glazing. Wynwood's commercial corridor, Coral Gables' institutional and office market, Doral's industrial and warehousing explosion, Hialeah commercial, and the full Brickell City Centre plus Related Group development pipeline — all of it requires glazing subs who understand HVHZ at a technical level.
ACG's West Palm Beach headquarters is 70 miles north of Miami. We've been mobilizing crews to Miami-Dade for over a decade. We maintain active supply relationships with Miami-Dade distributors, have working knowledge of county building officials and their review standards, and run our project coordination through AI-managed scheduling that keeps complex Miami projects on timeline despite permit complexity.
High Velocity Hurricane Zone (HVHZ) is a Florida Building Code designation that applies to all of Miami-Dade and Broward counties. It was established after Hurricane Andrew (1992) exposed catastrophic failures in standard window and door systems. HVHZ requirements have remained among the most stringent building envelope standards in the world.
The critical distinction GCs must understand: HVHZ requires Miami-Dade NOA (Notice of Acceptance), not a standard Florida Product Approval (FL#). These are two separate approvals issued by two separate authorities. A glazing product can hold a valid FL approval number and still be prohibited from use in Miami-Dade County because it lacks the corresponding NOA.
Miami-Dade NOA testing follows TAS (Testing Application Standard) protocols — TAS 201 (impact), TAS 202 (uniform static air pressure), and TAS 203 (cyclic wind pressure loading). TAS testing is more demanding than the ASTM E1886/E1996 protocols used for standard FL approvals. Large missile impact resistance (9-lb 2x4 at 50 fps), cyclic pressure sequencing, and water infiltration testing at elevated pressures are all required before Miami-Dade BCCO issues an NOA.
HVHZ-rated impact systems engineered to Miami-Dade NOA specifications. ESWindows, CGI, and Slimpact. TAS-tested, NOA-documented, and installed to pass Miami-Dade inspection — first time, every time.
Euro-Wall and PGT commercial storefront systems for Miami retail, medical, mixed-use, and office. Full NOA documentation. Shop drawings engineered for Miami-Dade plan review standards.
Slab-to-slab systems for Brickell towers, Doral mid-rise, and large Miami commercial. HVHZ wind load calculations, NOA-compliant systems, and AI-sequenced installation against your master schedule.
UL-certified TGP fire-rated assemblies, automatic entrances, sliding walls, and interior glass partitions. Life-safety compliant for Miami healthcare, hospitality, mixed-use, and institutional projects.
ACG has been working in Miami-Dade County long enough to know what makes or breaks a glazing scope in this market: NOA documentation that clears plan review on the first submission, submittal packages with complete TAS testing records, and field coordination that keeps up with Miami's compressed construction timelines.
Our West Palm Beach HQ means we're 70 miles from the heart of Brickell — not 300 miles from a national company's regional office. We use AI-managed scheduling to coordinate complex Miami projects: proactive submittal tracking, material procurement tied to your actual pull schedule, and real-time crew dispatch coordination so your super isn't waiting on the glazing sub.
ACG delivers HVHZ-certified commercial glazing across the full South Florida metro. Every system installed in Miami-Dade and Broward carries proper Miami-Dade NOA documentation.
Yes. ACG is fully certified to work in Florida's High Velocity Hurricane Zone (HVHZ), which covers all of Miami-Dade and Broward counties. Every system we install in HVHZ carries the required Miami-Dade Notice of Acceptance (NOA) — not just a general Florida Product Approval. Our submittal packages include TAS-tested documentation, product approval numbers, and engineer-of-record sign-off built to pass Miami-Dade plan review on the first submission.
ACG installs multiple systems carrying Miami-Dade NOA approval, including ESWindows commercial series (NOA tested to TAS 201/202/203), ESWindows commercial series, and Slimpact impact systems. For storefront and curtainwall, we source Euro-Wall and PGT products with current Miami-Dade NOA numbers on file. We do not substitute NOA-approved products with standard Florida Product Approvals when working in Miami-Dade County.
Florida Product Approval (FL#) is the statewide approval issued by the Florida Department of Business and Professional Regulation — sufficient for most of Florida. Miami-Dade NOA (Notice of Acceptance) is a separate, more rigorous county-level approval required specifically for HVHZ work in Miami-Dade and Broward counties. NOA testing follows TAS protocols — TAS 201 (large missile impact), TAS 202 (static pressure), TAS 203 (cyclic pressure) — which are more demanding than the ASTM tests used for FL approvals. A glazing sub showing up in Miami-Dade with only a FL approval number cannot legally install that system in HVHZ. This is one of the most common compliance failures ACG is called in to resolve.
ACG's West Palm Beach headquarters is approximately 70 miles north of Miami — a routine mobilization distance for a company that has been actively working in South Florida for 14+ years. We maintain established supply relationships with Miami-Dade distributors for ESWindows, CGI, and Euro-Wall, enabling local material staging and reduced lead-time exposure. Our AI-managed scheduling system coordinates crew dispatch, submittal tracking, and material delivery against your actual construction sequence. You get real-time status on every open item, not Monday morning emails.
ACG handles the complete commercial glazing scope in Miami: HVHZ-rated impact windows and doors, commercial aluminum storefront systems, slab-to-slab curtainwall and window wall for towers and mid-rise, UL-certified fire-rated glass assemblies, automatic entrances, and interior glazed partitions. One sub. Every opening. We self-perform the installation — we do not broker the work to unknown crews. See our Fort Lauderdale page for Broward County project details.
ACG serves commercial storefront scope across all of Florida. Most-requested markets below; full city directory in the link.
TAS testing, NOA documentation, and what GCs need to know about specifying HVHZ-rated impact systems in Miami-Dade County.
ACG's home market — West Palm Beach and Palm Beach County. 70 miles north of Miami with the same HVHZ standards and full commercial glazing scope.
Broward County HVHZ glazing — Las Olas, the I-595 corridor, Port Everglades area, and the full Broward County commercial market.
Send your drawings. Our team returns a detailed scope — HVHZ-compliant system recommendations, NOA-documented products, and a complete Division 08 scope breakdown — within 48 hours.
Send Us PlansWorking a project in West Palm Beach instead? Our WPB storefront glazier page covers the Palm Beach County path.
ACG installs the full CSI Division 08 (Openings) scope across the state — hurricane-zone and inland. Whether the project needs ESWindows impact-rated curtain wall in Miami-Dade or standard architectural storefront in Orlando, the same team delivers.
After delivering 350+ commercial glazing projects across Florida, ACG opens its Nashville office in the third quarter of 2026. The same AI-augmented operating model, the same Division 08 single-source scope, brought to the Tennessee commercial construction market — office, multifamily, retail, hospitality, healthcare.
Nashville early-bid list